Āhua Gallery

Kete Kai is a food gathering basket that is typical used to house food from the ocean or the land. Kete kai was used for every type of food that was gathered. You were not allowed to mix land food kete with the ocean food kete as it was tapu. The pattern on this kete kai is taki tahi and the holes are called puareare.

Material: Harakeke

Measurements: 360mm x 200mm

Kete Kai is a food gathering basket that is typical used to house food from the ocean or the land. Kete kai was used for every type of food that was gathered. You were not allowed to mix land food kete with the ocean food kete as it was tapu. The pattern on this kete kai is taki tahi and the holes are called puareare.

Material: Harakeke

Measurements: 340mm x 490mm

Material: Parāoa (Whalebone)

Measurements: 69mm x 22mm

In Māori carving there are three predominant designs for heads: the ‘wheku’ with the long eyes; and the ‘ruru’, which also has round eyes but with a point at the top. The different designs were used by carvers to illustrate the character of the subject they were carving.

Koruru are frequently found fitted to the gable of a whare whakairo (carved meetinghouse) as a representation of the tribe’s eponymous ancestor.

Material: Parāoa (Whalebone)

Measurements: 102mm x 58mm x 27mm

In Māori whakapapa (genealogy), all Māori flutes come to us from Hine Raukatauri, the daughter of Tānemahuta, the atua (spiritual entity) of the forest and birds. Hine Raukatauri is best known as the atua of flute music. She loved her flute so much that she chose to live inside it. She is now personified as the case moth that hangs from branches of trees in a long slender cocoon. This case moth cocoon is where the pūtōrino gets its shape from.

Material: Mataī (NZ Native)

Measurements: 400mm x 70mm x 50mm

Often the bailer (tatā, tīheru or tā wai) was beautifully carved, and some were given a name. In canoe traditions, tribal members still name the bailers used on the original voyaging canoes from Polynesia.

Material: Tōtara (Red Pine)

Measurements: 270mm x 370mm

In Māori carving there are three predominant designs for heads: the 'wheku' with its long eyes; the 'koruru' with its round eyes; and the 'ruru', which also has round eyes but with a point at the top. The different designs were used by carvers to illustrate the character of the subject they were carving. The long eyes of the wheku were often used to depict a squint or frown.

The wheku was commonly used in Māori carvings by some tribal areas and was also placed on the apex of the Māori meeting house to represent an eponymous ancestor.

Material: Tōtara (Red Pine)

Measurements: 250mm x 130mm x 30mm

Autui were customarily used as a pin for fastening cloaks and may be made from bone, stone, wood or shell. They may also have been worn through the ear as an earring or around the neck as a pendant. Autui are still commonly worn as pendants and earrings and as with most Māori personal adornments, are often passed down generationally.

Material: Paua Shell

Measurements: 118mm x 15mm

Heru were produced in varying shapes and sizes and were made from rākau (wood) and in some instance’s parāoa (whalebone). These combs were highly valued as personal heirlooms and were consequently passed down from one generation to the next, often acquiring their own personal names.

The combs were mostly decorative and held the pūtikitiki (top knot) in place. When a comb was broken, it was placed in a swamp or a sacred place for safe keeping because the head was the most sacred part of the body and therefore tapu (sacred).

Material: Tōtara

Measurements: 230mm x 90mm x 4mm

Smaller hoe such as this were used in ceremonies such as the launching of a waka taua or war canoe, and in other rituals also. This particular hoe has the northern fish scale design or unaunahi on the front. Although the hoe looks quite simple, its not until you turn it around to see the reverse side of the hoe you see the beauty of the taitokerau serpent art. The twisting shape is said in some versions to represent an eel, another version says it is based on a stick insect. Many hoe have a concave or dished out back, where as this one has the northern figure carved in the dish, making it very unusual.

Material: Tōtara (Redpine)

Measurements: 640mm x 62mm x 18mm

Papahou are predominantly made to house small, treasured belongings and were historically owned by people of high standing within their tribe. Papahou were highly prized and carefully treasured as they were passed between generations as heirlooms.

Material: Tōtara (Red Pine)

Measurements: 370mm x 120mm x 75mm

Shark teeth were highly sought after to wear as a symbol of prestige for personal adornment. They were reflective of the mana of the shark itself.

Material: Onewa (NZ Greywacke)

Measurements: 73mm x 21mm