Āhua Gallery

Kete whakairo are woven flax bags of a finer quality than the general utilitarian kete. They are normally made from prepared strips of flax and/or kiekie, some of which have been dyed. Kete whakairo may also feature geometric designs.

Material: Harakeke & Muka

Measurements: 455mm x 135mm

Tokotoko are used when speaking on the marae – by esteemed orators – to indicate the direction of a speaker’s kōrero (speech). They often have the whakapapa (genealogy) of the orator carved into them and these can also be referenced by the orator during his address.

Material: Rātā

Measurements: 970mm x 45mm x 35mm

Aurei were customarily used as a pin for fastening cloaks and may be made from bone, stone, wood or shell. They may also have been worn through the ear as an earring or around the neck as a pendant. Aurei are still commonly worn as pendants and earrings and as with most Māori personal adornments, are often passed down generationally.

Material: Koiwi (Beef Bone)

Measurements: 137mm x 9mm x 9mm

Aurei were customarily used as a pin for fastening cloaks and may be made from bone, stone, wood or shell. They may also have been worn through the ear as an earring or around the neck as a pendant. Aurei are still commonly worn as pendants and earrings and as with most Māori personal adornments, are often passed down generationally.

Material: Koiwi (Beef Bone)

Measurements: 123mm x 12mm x 8mm

Aurei were customarily used as a pin for fastening cloaks and may be made from bone, stone, wood or shell. They may also have been worn through the ear as an earring or around the neck as a pendant. Aurei are still commonly worn as pendants and earrings and as with most Māori personal adornments, are often passed down generationally.

Material: Koiwi (Beef Bone)

Measurements: 95mm x 11mm x 10mm

Aurei were customarily used as a pin for fastening cloaks and may be made from bone, stone, wood or shell. They may also have been worn through the ear as an earring or around the neck as a pendant. Aurei are still commonly worn as pendants and earrings and as with most Māori personal adornments, are often passed down generationally.

Material: Koiwi (Beef Bone)

Measurements: 90mm x 13mm x 6mm

Aurei were customarily used as a pin for fastening cloaks and may be made from bone, stone, wood or shell. They may also have been worn through the ear as an earring or around the neck as a pendant. Aurei are still commonly worn as pendants and earrings and as with most Māori personal adornments, are often passed down generationally.

Material: Koiwi (Beef Bone)

Measurements: 100mm x 13mm x 5mm

Aurei were customarily used as a pin for fastening cloaks and may be made from bone, stone, wood or shell. They may also have been worn through the ear as an earring or around the neck as a pendant. Aurei are still commonly worn as pendants and earrings and as with most Māori personal adornments, are often passed down generationally.

Material: Koiwi (Beef Bone)

Measurements: 90mm x 11mm x 5mm

Aurei were customarily used as a pin for fastening cloaks and may be made from bone, stone, wood or shell. They may also have been worn through the ear as an earring or around the neck as a pendant. Aurei are still commonly worn as pendants and earrings and as with most Māori personal adornments, are often passed down generationally.

Material: Koiwi (Beef Bone)

Measurements: 95mm x 10mm x 5mm

The main purpose of this kete is to be a work basket, it is usually made from Harakeke (NZ Flax) of which the commencement is a 3ply braid at the bottom of the kete.

Material: Harakeke

Measurements: 300mm x 220mm x 85mm

The mark of a high Chief was one who wore the Rei Puta (whale tooth pendant), as the teeth of the Sperm Whale were highly prized because of their rarity. With actual whale teeth being such a rarity, it became common to fashion the tooth form from other materials.

Material: Onewa (NZ Greywacke)

Measurements: 135mm x 50m

The mark of a high Chief was one who wore the Rei Puta (whale tooth pendant), as the teeth of the Sperm Whale were highly prized because of their rarity. With actual whale teeth being such a rarity, it became common to fashion the tooth form from other materials.

Material: Onewa (NZ Greywacke)

Measurements: 103mm x 48mm